Dreambox 800 HD SE V82 PVR Satellite Receiver with SIM 2.1 - 2013 Sales

Dreambox 800 HD V82 PVR Satellite Receiver with SIM 2.1 - 2013 Sales Previous Dreambox 800 HD
In stock
SKU
DM800 SE
$325.99 $499.00
Powerful receiver for digital TV and Radio programs. Main features are a 400 MHz processor the Dreambox DM 800 HD se supports the Linux TV API •10/100MBit compatible Ethernet Interface •HDMI connector •plug & play Tuner •colored OLED display •plug & play slot for an internal 2,5" SATA hard disk •additional an eSATA connector Technical Features • 400 MHz MIPS Processor • Enigma 2, Linux Operating System • colored OLED - Display • MPEG-2 / H.264 Hardware decoding • Tuner: DVB-S, optional: DVB-C, DVB-T • Tuner Module, Plug&Play • 2 x Smartcard-Reader (Dreamcrypt CA) • Mini USB for Service and software update • 10/100Mbit Ethernet Interface • 1 x Scart (RGB, FBAS or S-Video) • HDMI • 2 x USB 2.0 • analog modem • S/PDIF Interface for digital bit stream out (AC-3) • 64 MByte Flash, 256 MByte RAM • 2 x SATA - for internal HDD 2,5“ - one external eSATA • unlimited channel lists for TV/Radio • channel-change time < 1 second • automatic service scan • directly bouquet-lists • EPG (electronic program guide) • multiple LNB-Switching control (supports DiSEqC) • OSD in many languages and skin-support • Videotext Decoder • extern 12V power supply DreamBox DM 800 HD se technical data DBS-Tuner mit DVB-S2: Frequency Range 950 .... 2150 MHz Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK) Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC DVB-S2: 10 – 31 Mbaud/s (8PSK) , 10 –30 Mbaud/s (QPSK) Video decoder: Video Compression MPEG-2 and MPEG-1 compatible, H.246 Video Formats 4:3 / 16:9 Letterbox for 4:3 TV-Device Audio decoder: Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3 Audio Mode Dual (main/sub), Stereo Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz Output analog: Output Level L/R 0,5 Vss on 600 Ohm THD > 60 dB (1 kHz) Crosstalk < -65 dB Output digital: Output Level 0,5 Vss on 75 Ohm Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF-Output optical, Toslink Ausgang Video: Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS 300 472 Standard TV-Scart: Output: FBAS, RGB, S-Video Mini USB service connector: Function: Update of Firmware Ethernet: 10/100 MBit compatible interface Function: Update of Firmware Analoge modem: analoge modem for Internet connection SATA Interface: for internal 2,5" HDD and one eSATA USB 2 x USB 2.0 Host LNB power and polarisation per tuner: LNB Current 500mA max.; short-circuit-protected LNB Voltage vertical < 14V no load, > 11,5V at 400mA LNB Voltage horizontal < 20V no load, > 17,3V at 400mA Count of active satellite position: DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control) Power consumption: < 15W at 12V External PSU Input: 110-240V AC / 50-60Hz / 0,6A Output: 12V = / 3,0A Physical specification: Ambient Temperature +15°C...+35°C Humidity < 80% Size (W x D x H): 225 mm x 145 mm x 52 mm Weight: 940 g without HDD

Dreambox 800 DE Running the popular Enigma2 firmware, its replacement capitalises on two years of technology progress. A key difference to its predecessor is that the processor has been upgraded from 300MHz to 400MHz, which should aid responsiveness. The OLED display has been upgraded to colour, and you now get a 'true' HDMI port instead of DVI. Appearance and connectivity: In other respects, the two receivers are very similar. The DM800 HD SE is slightly larger than its predecessor (225mm x 145mm x 52mm) although both are rounded off with near-identical glossy frontages. •10/100MBit compatible Ethernet Interface •HDMI connector •plug & play Tuner •colored OLED display •plug & play slot for an internal 2,5" SATA hard disk •additional an eSATA connector

Powerful receiver for digital TV and Radio programs.
Main features are a 400 MHz processor the Dreambox DM 800 HD se supports the Linux TV API

•10/100MBit compatible Ethernet Interface
•HDMI connector
•plug & play Tuner
•colored OLED display
•plug & play slot for an internal 2,5" SATA hard disk
•additional an eSATA connector

Technical Features

• 400 MHz MIPS Processor
• Enigma 2, Linux Operating System
• colored OLED - Display
• MPEG-2 / H.264 Hardware decoding
• Tuner: DVB-S, optional: DVB-C, DVB-T
• Tuner Module, Plug&Play
• 2 x Smartcard-Reader (Dreamcrypt CA)
• Mini USB for Service and software update
• 10/100Mbit Ethernet Interface
• 1 x Scart (RGB, FBAS or S-Video)
• HDMI
• 2 x USB 2.0
• analog modem
• S/PDIF Interface for digital bit stream out (AC-3)
• 64 MByte Flash, 256 MByte RAM
• 2 x SATA
- for internal HDD 2,5“
- one external eSATA
• unlimited channel lists for TV/Radio
• channel-change time < 1 second
• automatic service scan
• directly bouquet-lists
• EPG (electronic program guide)
• multiple LNB-Switching control (supports DiSEqC)
• OSD in many languages and skin-support
• Videotext Decoder
• extern 12V power supply
DreamBox DM 800 HD se technical data
DBS-Tuner mit DVB-S2:
Frequency Range 950 .... 2150 MHz
Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC
DVB-S2: 10 – 31 Mbaud/s (8PSK) , 10 –30 Mbaud/s (QPSK)

Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible, H.246
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device

Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, Toslink

Ausgang Video:
Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS, RGB, S-Video

Mini USB service connector:
Function: Update of Firmware

Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware

Analoge modem:
analoge modem for Internet connection

SATA Interface:
for internal 2,5" HDD and one eSATA

USB
2 x USB 2.0 Host

LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA

Count of active satellite position:
DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)

Power consumption:
< 15W at 12V

External PSU
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 3,0A

Physical specification:
Ambient Temperature +15°C...+35°C
Humidity < 80%
Size (W x D x H): 225 mm x 145 mm x 52 mm
Weight: 940 g without HDD

* You can add as many custom tabs as you need!
Size Bust (cm) Waist (cm) Hip (cm)
XS 82,5 62 87,5
S 85 63,5 89
M 87,5 67,5 93
L 90 72,5 98
XL 93 77,5 103